Skip to content Skip to navigation menu

Learn More about our other offerings:
Biosearch Technologies Oligo Synthesis | Lucigen Reagent Components | Rapid Genomics Genotyping Solutions | SeraCare

Looking for oligos? Visit our oligo and Stellaris dedicated platform at oligos.biosearchtech.com
 
cancel
  1. Home
  2. Cal Fluor

You searched for "Cal Fluor"

Did you mean: cal flow?

  • 1
  • 2(current)
  • 3

Does Amp-Seq provide data analysis software to generate genotype calls?

AMPSEQ-001
Biosearch Technologies provides an analysis pipeline (the BiosearchCaller software), compatible with the Amp-Seq technology, to produce genotypes from the sequencing data. The software can be accessed via a cloud system and our technical team will support the deployment and initial setup.

Do you have any recommendations for purifying DNA from difficult biological samples such as plant leaves and seeds before shearing?

NXGSEQ-003, NXGSEQ-004, 15300-1, NXGSEQ-001, NXGSEQ-002

No. We do not have any specific recommendations for DNA purification. However, the purified DNA should be high quality with A260/280 ratios above 1.8. The DNA should also be free of detectable RNA contamination. Prior to shearing/fragmentation, the purified DNA samples can be analysed on 0.7% agarose gel to check for sample degradation and RNA contamination.

Why are genotype calls not achieved for specific targets?

AMPSEQ-001
Sometimes, despite a successful primer design for a target, genotyping calls are not achieved for a specific target. This can be caused by several issues including poor primer design and issues with the synthesis of the primers. In addition, if genomic reference data for both parental strains is not provided for target primer design, some primer pairs might not work for all F1 samples. Missing genotypes are generally attributed to low depth. Certain targets cannot be amplified because of sample quality issues or unknown parental bias in the genomes. Our standard design process addresses the parental bias by avoiding primers on known variability in the genome. Known variation information can be provided to us in the target flanking sequences through the Data Submission form.

Have you produced proteins at scale?

COMCEL-008

Our customers have reported growth of ClearColi strains in a 5 litre fermenter and shown optical density levels in excess of 150, and that some defoaming agents (particularly silicone-based defoamers) are beneficial while other defoaming agents such as polypropylene glycol may inhibit cell growth.

Should I use electrocompetent or chemically competent cells to make my library?

We recommend using electrocompetent cells for library generation, because the transformation efficiency for electrocompetent cells is higher. Higher transformation efficiency preserves library diversity.

Why are genotype calls not achieved for specific targets?

AMPSEQKIT1

Sometimes, despite a successful primer design for a target, genotyping calls are not achieved for a specific target. This can be caused by several issues including poor primer design and issues with the synthesis of the primers. In addition, if genomic reference data for both parental strains is not provided for target primer design, some primer pairs might not work for all F1 samples.

Missing genotypes are generally attributed to low depth. Certain targets cannot be amplified because of sample quality issues or unknown parental bias in the genomes. Our standard design process addresses the parental bias by avoiding primers on known variability in the genome. Known variation information can be provided to us in the target flanking sequences through the Data Submission form.

How do I calculate transformation efficiency (TE)?

TE = (# colonies) / (µg DNA transformed) * (final transformation volume) / (volume plated) * dilution factor = cfu / µg

For example, if you transformed 1 ng of plasmid DNA into cells, diluted the transformation to a final volume of 1000 µL with Recovery Medium, then plated 25 µL of a 1:100 dilution of that transformation, and the next day you counted 150 colonies on your plate, your calculation would look like this:

# of colonies: 150
µg DNA transformed: 0.001
Final tansformation volume = 1000 µL
Volume plated = 25 µL
Dilution factor = 1 µL into 100 µL, 100-fold (factor of 100)

TE = (150 / 0.001) * (1000 / 25) * 100 = 6 x 108 cfu / µg

Can I use other dyes besides the Green Fluorescent Dye available in the LavaLAMP™ DNA Master Mix with Dye?

Yes. Syto-13 (Molecular Probes) and EvaGreen (Biotium) have both been tested with the LavaLAMP DNA Master Mix and they perform well.

Can intercalating dyes be used with this mix?

BHQ-001

BHQ Probe Master Mix has been optimised for use with hydrolysis-probe based chemistry, for both end-point genotyping and qPCR applications. For use with intercalating dyes, we would recommend that you perform your own optimisation and validation to ensure reproducible sensitivity and specificity is achieved using your selected dye.

There are transformation protocols for chemically competent cells that do not include a heat shock. Do I need to heat shock my competent cells?

We have not tested alternative transformation protocols extensively. You can avoid the heat shock step, but it is highly likely that your transformation efficiencies will decrease.

  • 1
  • 2(current)
  • 3